How To Draw A Western Saddle

DIY A PVC Saddle Correspond $ten.00

Recently I have been bringing my own saddle to my riding lessons. And since I have been doing this, I take tried to find different makeshift saddle stands to have my saddle sitting like a saddle in my auto. And then far, I take not had keen results. I have tried a square pail that originally held kitty litter, that didn't work at all. The size was almost perfect, but when I went around a corner….thud went my saddle.

I take tried a v gallon pail, preparation box, and even but tipping my saddle up onto it'south pommel. Just I want to have my saddle sit like information technology's supposed to so I decided I needed to have something real, like a existent portable saddle stand up for my saddle that will fit in my car.

Portable Saddle Stand Options

I have seen some different styles of dissimilar portable saddle stands for sale online. I really liked this one, it's called the Pegasus

Information technology hooks up to a headrest in your car and you lot set your saddle on information technology. I do like the style, and design. Only, I don't like the $180.00 toll tag.

Another option I found, and really liked, and it was much more affordable on eBay. Information technology is called a Stubbs Saddle Mates carrier, Not only does it hold your saddle, but y'all can also put your helmet and other gear on the bottom of it.

This thing is crawly, and it is less expensive than the Pegasus at $72.00 including shipping. Only I was curious if I could make something myself.

And then I found the portable PVC saddle stand that is meant to go in your car. This ane is by Cool Saddle Racks

This is exactly what I was looking for. They sell this one on Amazon for $92.00 plus $5.00 for shipping. Over again, a little expensive for my liking. Merely I thought information technology looked pretty straightforward, and I was confident I could build information technology myself. So I did what any normal diy person would practise, I looked for instructions on Pinterest. And while I plant lots of images, I could non find the instructions of how to build information technology. That's when I decided to become to Home Depot, buy the PVC stuff and exercise it myself.

DIY PVC Saddle Stand

It was so easy to make this saddle stand. Actually, information technology wasn't hard at all and I was able to practice it in an afternoon. I even had to modify it several times to become it to be what I really wanted. I am really happy with how it turned out. And I am fifty-fifty happier that it but price me nearly $10.00 in supplies to build it. The full toll was $xx.00 because I had to buy the tube cutting tool. Just the tool fabricated fast work of cutting the pvc pipe.

I built this using 1/2″ schedule 40 PVC. I recall information technology would be fifty-fifty sturdier if I used iii/4″ pipe, just Home Depot did not have the little fittings that I needed in 3/iv″, so I stuck with the 1/2″ size. If yous desire to build this yourself, please follow the instructions beneath. I promise, this is a elementary project to practice, fifty-fifty if you lot are not a carpenter!

What You Will Need

• 20 Anxiety PVC Pipe 1/2″ (two 10 foot pieces)
• 4 T PVC fittings 1/2″
• iv xc Degree elbows one/ii″
• ii Dual ninety Degree (3 mode Elbow) 1/2″
• 4 End caps 1/2″
• Tube cutter
• Vise-Grip Pliers
• Measuring tape
• Sharpie Marker
• PVC Primer and Cement
• Sandpaper

I have put links to almost of the items as a reference. You can purchase them through Amazon, merely the PVC footling fittings are a lot cheaper at Dwelling Depot, or stores like that. If you purchase them on Amazon, you will not be able to make this saddle stand for $10.00. I was able to buy the 10 human foot PVC pieces for $2.20 a piece. But getting a ten′ long piece of PVC into a machine could be difficult. But if you purchase the tube cutter at the aforementioned time, y'all tin can just cut downward the PVC and so that information technology fits into your car, or truck. This is what nosotros did so we didn't have to tie down ii pieces of PVC in our truck.

What You Will Practice

Ok, so now you have all of your Home Depot treasures at home. It might look like a bunch of stuff, just don't worry, this affair is really easy to build. Merely in order to build information technology, we need to know what pieces get where. Hither is a bones diagram of where the pieces you lot will cutting will go. I do apologize for the crudeness of this drawing, but I have no idea of how to draw "official" plans, or describe it with a figurer plan. So here is your schematics for where the pieces will go:

And now y'all volition need to cut all of the PVC pieces. Cut your PVC into the post-obit pieces:

• iv pieces 12″ long (feet)
• 4 pieces vii″ long (sides for holding saddle)
• 2 pieces 24″ long (long sides for property saddle)
• 2 pieces xv″ long (the legs that will attach to feet)
• two pieces 2″ long (connects the iii fashion elbow to the spine piece for the saddle)
• i piece 18″ long (this is the spine for where your saddle will rest)

Assembling The Saddle Rack

Once you have all of your pieces cut, you lot should have xv pieces of PVC cut to various lengths. Now all you demand to do is assemble the pieces together. In social club to brand that a petty scrap easier, here are some different photos, and then you tin can come across where the fitting pieces connect the PVC pieces together.

I almost forgot, before yous start assembling the pieces, be sure to take your sandpaper, and sand all of the edges. When you are cut the PVC, it tin can bevel out the border, making it very difficult to become the pipe to fit into the fittings. To make that easier, just sand all ends of the PVC.

A side view

Viewed from the front (or back)

Another view

Together with these photos, and my high tech schematic cartoon, you should be able to put the puzzle pieces together, I think!

Completing The Saddle Rack

And subsequently yous have figured out how all of the pieces go together, I would encourage you to permanently connect the pieces together. This is where the PVC primer and cement come up in. Showtime you primer the sections, so y'all coat that with the cement, and firmly adhere the pieces together. This will forestall your masterpiece from coming apart when you put your saddle on information technology.

And if it carp's you to run into the lettering on the PVC, or the imperial color from the primer and cement, y'all could too finish the project by spray painting it with spray paint that will adhere to plastics. Rustoleum makes a cracking pigment in many different colors that you could customize your saddle rack, and go far look very professional. For myself, I didn't care about how information technology looks in the back of my motorcar, so I left it as is.

And this is how my saddle rack turned out.

I am very happy with the results. And I made it for about $10.00 in supplies. My total investment because of ownership the tube cutter was $25.00.

Simply everything else I already had at dwelling house, including the spray pigment. I wish I could accept constitute everything in three/iv″ to get in actually sturdy, but even in the 1/2″ size, I recall it is sturdy enough for my English saddle. Just if you take a western saddle, you could also make this with 1″ PVC to make information technology actually sturdy.

Rubber First

And as a side notation, if you are going to be keeping your saddle in your auto, similar I have to when I am at work, I would highly encourage you to continue your saddle covered, so people walking by your car don't really know what it is. I accept had a saddle stolen out of my automobile before, which really sucked, and I would never want you lot to take to get through that. So keep it covered, and invisible if at all possible. And always, always, ALWAYS, lock your auto, especially when your tack is inside of it!

And now I take a saddle rack that tin can alive in my car, and become my saddle to my lesson, or wherever else I might exist going. If yous are looking for a super affordable saddle rack for your car that you can brand yourself, hither you go! And if you were looking for a way to make some actress coin, you could even sell these on eBay, Etsy or Amazon. In that location doesn't seem to be a lot of people making these notwithstanding, and if y'all were wanting to earn some extra money to fund your equus caballus habit I think this might exist a viable option for you.

This is past no ways the merely way to make a PVC saddle rack. But hopefully this gives you a general idea of how y'all can become artistic, and make your ain saddle rack for your car.

Source: https://www.budgetequestrian.com/how-to-diy-a-pvc-saddle-stand-for-10-00/

Posted by: mullengazincomed79.blogspot.com

Share this post